How To Remove Mold From Silicone Caulking: Get off Mold From Shower Caulk Naturally

The mold is an irritating substance in your house that can grow anywhere. Whether it is your bathroom or the moist corner of your kitchen, this black fungus can follow you everywhere.

Generally, they are harmless. Their contribution to deteriorating the environment of your interior is more than serious health hazards. However, mold spores can be released into the air in some cases, resulting in a human inhalation.

A damp and moist environment is the perfect habitat for mold to grow. Places where light is low to reach, such as silicone caulking of your house, are the easy targets of mold. Here, we will discuss today how to remove mold from your silicone caulking.

How to Remove Mold from Silicone Rubber Sealant (6 Methods, Solved!)

There are several ways you can remove mold without having to damage silicone sealant. Each of the processes has its own pros and cons. This is because you need chemicals to remove and kill mold. And all chemicals, at specific points, are harmful to human health.

Our article will focus on five effective solutions to remove mold from silicone rubber grout for permanent. Plus, an additional key with bleach for your information.

Natural Cleaners: When chemical components offer you a clean solution, their drawbacks can be at large too. In order to keep it entirely out of danger, natural cleaners are a relief.

Baking soda is a safe solution for removing the mold from your ground. It also eliminates moisture from specific corners of your home through absorption that causes mold to grow in the first place.

Take a quarter of a tablespoon of baking soda and mix it with water. Spray it on the affected area and scrub the area with a brush. Once you are done with removing mold, respray the solution on the same area and leave it to dry.

That’s how the mold won’t come back to the same place.

You can also use lemon or oil the same way as baking soda as natural solutions.

Apply lemon juice directly to the affected area. And leave it for five minutes before you clean the place. In the case of oil, use tea tree oil and mix it with water with a ratio of 1:3. Spray it over the place and leave it open for 1 hour before removing the mold.

Use Ammonia: Ammonia is a potential solution for removing mold. It is very effective on hard surfaces; however, not so effective on porous ones (where liquid passes from one end to another).

To use ammonia to get rid of mold, mix 50% clear ammonia with 50% water and spray on the affected area. Then leave the place open for 2-3 hours before cleaning and wiping the mold out. You need to remove the mold spores separately once you are done wiping the mold away.

Being a chemical component, ammonia can be dangerous to health if not used with caution. Ammonia is corrosive in nature. If mixed with bleach or chlorine, it can result in poisonous gas.

Hydrogen Peroxide: Chemicals are often harmful while using. But when it comes to hydrogen peroxide, it is comparatively safer than other chemical compounds like bleach. It doesn’t leave any toxic materials or harmful gas behind. Hence, it is relatively safer to use hydrogen peroxide as a quick solution.

Use 3% concentrated hydrogen peroxide. Spray it all over the surface where it is moldy. Make sure all the affected areas are covered with the solution. Let the place be for 10-15 minutes. Then scrub and wash the area properly to remove all the mold and mold spores.

Borax: Borax is a natural compound and alkaline in nature. It is a type of mineral and often deals with the pH level of the environment that mold prefers to grow within.

It is completely harmless and effortless to use. Use one cup of Borax to one gallon of hot water. Mix the solution until Borax is completely dissolved. Spray all over the affected area and wipe them hard until the mold is removed. Repeat the process, and when finished, leave the place to dry.

Caution: It is wise not to use Borax on a porous surface like wood.

Bleach Solution: Bleach is a very powerful chemical product. EPA often recommends not to use bleach except in some exceptional cases. This is because the amount of toxic residue bleach leaves behind; is very harmful to human health.

Bleach doesn’t exterminate the mold underneath the surface, and the molded membrane remains, resulting in the mold’s possibility of growing back again.

However, if you have no other options other than using bleach to remove black mold in shower caulk, here is what you should do. Use one cup of bleach to one gallon of water. Spray it all over the place. And scrub it with a brush. Once you are done, let the area dry and then wipe it with a clean piece of cloth. This will remove any left harmful residue of bleach.

How to remove mold from silicone caulk without bleach?

There are several ways to kill mold off the surface without using bleach. We definitely do not recommend using bleach as it has some hazardous drawbacks. Vinegar is an alternate option to bleach. However, you can also find plenty of other choices mentioned above.

How to remove mold from Tub, Shower, and Sinks caulking?

There are several ways to clean mold off from places where you use water most. These places are rapidly exposed to water. Please make sure to dry your tub or shower or sink’s caulking before using any chemical, or be it any natural remedy.

The best time is the morning when these areas have almost no use during the nighttime. Once these specific areas are dry, follow any of the procedures above to remove mold.

How to remove black mould from silicone sealant naturally?

Silicone sealant in your bathroom is one of the ideal spots for mold to grow. Using very powerful chemical components can wash away the silicone sealant with the mold itself. Hence, it is wise to use natural remedies to remove mold from the silicone sealant.

Using vinegar, lemon, or tea tree oil, baking soda can be an excellent solution to kill mold and also remove mold behind caulking.

Final Words

The mold is often an awful substance found in the moisture parts of your house. The more you let it grow, the more reliable it will be to mess with the beautiful environment of your home. Nobody would want a piece of rough black or green mold. However, being unnoticed, they can still grow in different parts of your house.
A quick read to our article will help you to get a potential remedy against the mold. For valuable articles like this, follow our blog and let others know as well.

Related Posts:

  1. How To Paint Over Silicone Caulking

Leave a Comment